User's Manual

VXU Operator’s Manual
Metering Systems
- 10 -
the “Enter” key on the keyboard after pressing “CTRL + E” to save the
readings to the diskette, or click the “EXPORT” button. After several
seconds, the readings will be saved to disk and you can continue with reading
meters.
5. To begin reading again, simply press “CTRL+R”. You may also begin reading
again by moving the mouse up to “Route” at the top of the screen, clicking,
and choosing “Run Route”. The interrogation will resume. Remember to
repeat step 11 (to save the readings) periodically.
6. When finished reading the route, Export the readings to disk one last time,
and take the disk back to the office for processing. You can do this by either
pressing “CTRL+E” and then “ENTER” again, or just quit AutoVu and the
Export window (shown above) should pop up automatically. After pressing
“ENTER” or clicking on “Export” AutoVu will save the readings to diskette and
AutoVu will close.