User's Manual

Physical Description iCon™ Form 2S and Form 12S Meters
meter’s memory for internal computation. All billing data and system information is
stored in the meter’s non-volatile memory. System information, compliant with ANSI
C12.19a data table format, includes the following:
User Data
Calibration Date Set by Invensys when the meter is first calibrated
User Configuration Date Set by the utility when the meter is configured for use
Serial Number 16 digit decimal serial number
Identification 20 decimal digits of identification data
kh Text representation of the kh value in kWh (default 0.0010)
kt Text representation of the kt value in kWh (default 0.0010)
Pulse Divider Pulse divider value (default 1.0)
User Data 16 bytes of free-format data for the utility to set as required
Manufacturer Data
Manufacturer Manufacturer ID code
Model Meter model number
Hardware/firmware Versions Hardware/firmware version numbers
Meter Form Meter form (2S)
Meter Class Amps Class amps as text string (200.0)
Meter Test Amps Test amps as text string (30.000)
Manufacturing Status Undefined manufacturing status information
Display
The Liquid Crystal Display (LCD) on the front of the meter shows real-time Total kWh
and indicates the current operational status of the meter. Information on the LCD is
visible in direct sunlight and can be read at angles of 15 degrees above and below
the display window’s centerline. The following graphic shows how the meter display
will look when first put into service.
The next graphic shows all available segments on the meter’s LCD and identifies the
standard features. Each feature is detailed in the following paragraphs.