User's Manual

Physical Description iCon™ Form 2S and Form 12S Meters
Physical Description
The iCon™ MXU 530-E Meter was designed to be assembled and disassembled
without the use of tools. This modular design allows you to upgrade or repair a unit
quickly and easily. The basic components of the iCon™ meter are depicted below and
detailed following the diagram.
MXU 530-E
DISPLAY BOARD
POWER SUPPLY
BOARD
Base Assembly
The meter’s Base Assembly is molded from highly durable thermoplastics that provide
a stable platform for the meter’s Sensor Module, Register display board and up to two
additional option boards. The blades (or blade assembly) from the Sensor Module
extend through the Base Assembly to connect to the service socket of the main power
system.
Sensor Module
Power Supply
The iCon™ meter uses a capacitive tap to provide a regulated voltage to the Sensor
Module and the LCD display portion of the MXU 530-E board. The power supply can
withstand a voltage transient as described in IEEE C62.41, Level C and applied in
accordance with Section 5 of the ANSI C12.20-1998.