User Manual

The following document and its attachments are considered proprietary and confidential and the Property
of Sensus Metering Systems Inc. To be used only for the purpose for which it is submitted. All rights are
reserved to Sensus Metering Systems Inc. Reproduction without prior written consent is prohibited.
SENSUS CONFIDENTIAL
 Send “Set TOU Bin Definition” command to thermostat
i. Repeat n times until Ack received
 Send “Set TOU Setbacks” command to thermostat
i. Repeat n times until Ack received
 Send “Set Energy Pricing” or “Energy Cycling” command to thermostat
i. Repeat n times until Ack received
 Send “Enable Set TOU Rate and Current Time” command to meter
i. Repeat n times until Ack received
 Ping Meter for Set TOU Rate and Current Time command
i. Ping thermostat for Thermostat Status
ii. Repeat d. and i. n times until Thermostat Status shows “Received Set TOU Rate
Command” flag is set
 Send Static Setup to thermostat
i. Repeat n times until Ack received
 Verify Meter – Thermostat Link and Setup information
4) Report Success or Failure, log results to file.