User's Manual

AMR Transmitter Mounting Instructions for Invensys (Equimeter, Rockwell)

models R750, R800

AMR Transmitter Installation

Installation Tasks

1. Remove index cover.

2. Remove index from gas meter.

3. Assemble index onto AMR transmitter.

4. Mount AMR transmitter and cover onto gas meter.

5. Initialize AMR transmitter with HHT.

Remove index cover

1. Use flat screwdriver to punch out the seals that cover the two (2) index

cover screws.

2. Remove and properly dispose the two (2) screws holding the index cover

onto meter, with flat screwdriver. If any screws shear off during the

cover removal (or were previously sheared off), the meter will need to be

replaced by a qualified utility representative. Reinstall any index cover

screws that were removed and cap with seals if possible. Enter the

appropriate information in the Mint HHT and skip to the next work

order.

3. Remove the index cover.