User's Manual

AMR Transmitter Mounting Instructions for Schlumberger/Sprague
models S175, S240, S250, MET250, S400 with slant interface
7
Assemble index and new cover onto
transmitter
1. Install the two (2) index screws to their place in the Transmitter with the
Phillips screwdriver. Do not insert the screws fully, to leave space for the
index to slide in.
2. Align the index shaft with the Transmitter’s shaft; adjust the wriggler’s
position by holding the proving hand on the index front side, and insert
so that there is no interference.
3. Tighten the index screws, securing the index to the Transmitter.