User's Manual

AMR Transmitter Mounting Instructions for Schlumberger/Sprague
models S175, S240, S250, MET250, S400 with slant interface
5
Remove index
1. Remove and properly dispose the two (2) screws holding the index onto
the meter, with small flat or Phillips screwdriver.
2. Remove the index and carefully clean any debris from it. Inspect for
proper index operation by turning the input shaft and verifying that the
gearing turns freely. Also, inspect the index for any missing or broken
hands. Place the index, or a new index if necessary, on a clean surface
near you for reinstallation later.
3. With a putty knife, scrap away any gasket material that remained on the
meter when the index cover was removed.