User's Manual

AMR Transmitter Mounting Instructions for Schlumberger/Sprague

models S175, S240, S250, MET250, S400 with slant interface

AMR Transmitter Installation

Installation Tasks

1. Remove index cover.

2. Remove index from gas meter.

3. Mount AMR transmitter onto gas meter.

4. Assemble index and cover onto AMR transmitter.

5. Initialize AMR transmitter with HHT.

Remove index cover

1. Use small flat screwdriver to punch out the seals that cover two (2) of the

three (3) index cover screws.

2. Remove and properly dispose the three (3) screws holding the index

cover onto meter, with flat screwdriver. If any screws shear off during

the cover removal (or were previously sheared off), the meter will need

to be replaced by a qualified utility representative. Reinstall any index

cover screws that were removed and cap with seals if possible. Enter the

appropriate information in the Mint HHT and skip to the next work

order.

3. Remove the index cover and dispose of properly.