User's Manual

AMR Transmitter Mounting Instructions for American Meter

AC250, AL175, AL250, AL5B, AL225, AL425

AMR Transmitter Installation

Installation Tasks

1. Remove index cover.

2. Remove index from gas meter.

3. Mount AMR transmitter onto gas meter.

4. Assemble index and cover onto AMR transmitter.

5. Initialize AMR transmitter with HHT.

Remove index cover

1. Use small flat screwdriver to punch out the seals that cover two (2) of the

four (4) index cover screws.

2. Remove and properly dispose the four (4) screws holding the index cover

onto meter, with flat screwdriver. If two (2) or more screws shear off during

the cover removal (or were previously sheared off), the meter will need to be

replaced by a qualified utility representative. Reinstall any index cover

screws that were removed and cap with seals if possible. Enter the

appropriate information in the Mint HHT and skip to the next work order.

3. Remove the index cover and dispose of properly.