User's Manual

Appendix: Screw Kits and Tools

Screw Kits

Screw kits accompany the AMR transmitters. Each kit contains any of the following (depending on

transmitter model):

• Mounting screws

• Index screws

• Index cover screws

• Snap seals

• 3M Scotchlok® UY-2 butt connector “gel-caps”

• Pipe clamp

Mounting Screws

1. Equimeter/Rockwell commercial meter (e.g. R750) – 5/16” x 3½” combo fillister

2. American commercial meter (e.g. AL800) – #18-18 x 84 Phillips pan head

3. American residential meter (e.g. AC250) – ¼” x 1” Phillips fillister

4. Schlumberger/Sprague residential meter (e.g. S175) – 10-24 x 1” Phillips fillister

5. Equimeter/Rockwell residential meter (e.g. R275) – 10-24 x 1” Phillips fillister

Index Screws

6. Equimeter/Rockwell commercial meter (e.g. R750) – WN1411 KA 60x14 Phillips

7. Equimeter/Rockwell residential meter (e.g. R275) – WN1412 KA 35x22 Phillips

8. American & Schlumberger/Sprague residential meter– WN1411 KA 40x12 Phillips

Index Cover Screws

9. All residential meters – WN1412 KA 50x20 Phillips

Tools

Mounting the transmitters require the use of standard and specialized tools. Depending on the model of the

transmitter, the following tools are needed.

• Phillips screwdriver (#1, #2)

• Standard screwdriver (¼” blade,

” blade)

• Stiff-blade putty knife

• Pointed tweezers

• ¼” Nut driver

• 3M Scotchlok® E-9Y steppe-jaw crimping tool with wire cutter

• Sensus handheld terminal (HHT)