Quick Guide

FlexNet® SmartPoint® Module
FOR ACLARA i210+c
QUICK GUIDE
EQG-10011-01
The Sensus FlexNet™ SmartPoint® module provides wireless
communication capability to electric utility meters. The Aclara i210+c™
meter is an electronic, single-phase or network, demand and time-
of-use (TOU) electricity meter intended primarily for residential
applications.
Technical Overview
The FlexNet communications network offers a simple, reliable, and
secure system that is economical for mass meter deployments, strategic
deployments, and rural applications while providing a multi-application
solution for all AMI end points. The FlexNet network enhances the
i210+c meter by providing AMI capability.
The FlexNet SmartPoint module is a printed circuit board which
provides wireless communication capability to the Aclara i210+c
electric meter. The SmartPoint module interrogates the meter registers
on a programmable interval from five minutes to daily readings. The
SmartPoint module then transmits the meter consumption and status
information at regular intervals.
The module mounts into the existing i210+c meter and acts as a “third
party AMR board.” It is designed to mount mechanically into the meter
with no additional mechanical modification required.
The module communicates via the FlexNet fixed wireless telemetry
network to provide electric meter readings and diagnostic data from the
meter to the utility provider via radio.
The module contains both a receiver and transmitter to allow for two-
way communications over the FlexNet network.
Specifications
The i210+c meter with the FlexNet module will
have a visible label containing the following
information:

Contains Model: FLXI2102

Contains FCC ID: SDBFLXI2102

Contains IC: 2220A-FLXI2102
Board Location