User's Manual

Revision 0.1 8 OF 9 7-8-2010
TO BE USED ONLY FOR THE PURPOSE FOR WHICH IT IS SUBMITTED. ALL RIGHTS RESERVED TO SENSUS
REPRODUCTION WITHOUT WRITTEN CONSENT IS PROHIBITED.
SENSUS CONFIDENTIAL
A.2 RF Exposure Statement for Flexnet L&G Focus
Radiation
Hazard
When operating the Sensus FlexNET Module, a minimum distance of 20 cm (7.8 inches)
is required between personnel and this antenna to comply with a radio-frequency
exposure limit of 1.0 mW/cm2.
Warning
To satisfy FCC RF exposure requirements for transmitting devices, a separation distance
of 20 cm or more should be maintained between the antenna of this device and persons
during device operation. To ensure compliance, operations at closer than this distance is
not recommended.
A.3 FCC Labeling Requirements
A.3.1 PCB FCC Label (internal label)
The PCB manufacturer must place an FCC label on the PCB device such as the one shown
below.