User Manual

Index
SmartPoint Module for the Elster A3 Meter ECMTM40000
service quality 14
set A/D calibration 12
set company meter number 9
set customer id 15
set customer meter number 14
set device id 10
set encryption key 12
set encryption key, receiver 8
set installed latitude/longitude 12
set latitude and longitude 4
set preffered buddy id, receiver 9
set real time clock 13
set static setup 3
set TCXO correction 12
set TCXO correction, receiver 3
set time 5
set transmitter id 7
set voltage quality settings 4
set voltage quality threshold 12
setup messages 6
basic command message format 7
basic reply message format 9
command/reply message definitions 9
SmartPoint
brown-out detection 1
Canadian narrow-band PCS 2
data security 6
initialization 1
mPass mode 3
normal mode 3
operating frequencies 1
overview 1
poll-response mode 3
power fail detection 1
power restoral notification 1
radio data security 6
radio transmit modes 2
RNI data security 7
TGB data security 6
U.S. narrow-band PCS 2
SmartPoint frequencies
FCC Part 24 2
RSS 134 2
SmartPoint module 2
SmartPoint power failure detection 1
SmartPoint radio transmit modes 2
specifications 1
current consumption 1
DC to DC converter 2
external AC line power 1
internal power supplies 2
power failure 1
startup timing 2
startup timing 2
status request 9
summation reading 13
supervisory transmit rate 2
sync 1
T
temperature, device alarm 17
testing message 1
TGB data security 6
tier information 11
time of last power failure 18
time since event 16
time since event, extended 17
total # of outages 18
Tower Gateway Base Station 3
transmit channel mask 4
transmit frequency channels 3
transmit modes 2
transmit operational mode 5
transmitter id, receiver commands 7
V
voltage phase alarms 16
voltage quality settings 4
W
write c12.19 data 10