User Manual

Index
SmartPoint Module for the Elster A3 Meter ECMTM40000
mPass mode 3
N
narrow-band PCS 2
normal mode 3
notification, power restoral 1
number of demand resets 20
O
on air
time requirements 3
on air control fields
AC power fail 2
battery low 2
payload encrypted 2
power restore 2
RF sequence number 2
on air fields
application code 3
application data 3
application sequence 3
control 2
CRC 3
ID number 1
length 2
message leader 1
repeat level/status 3
sync 1
on air message format 1
on demand read 5
operating frequencies 1
operation modes 1
optical direct serial connection 1
overview
Flexnet module 1
SmartPoint 1
P
payload encrypted 2
PCS frequencies 2
peak demand reading 9
peak demand time 12
phase voltages 9
ping 13
ping, receiver 6
poll-response mode 3
power fail detection 1
power failure 1
power failure alarm 1
power restoral notification 1
power restore 2
preferred buddy id 9
programmer id 6
purpose, manual 1
Q
quantity of tiers 14
R
radio data security 6
receive frequency channel 4
receiver command messages 1
C&I demand reset 11
C&I read c12.19 data 10
C&I writer c12.19 data 10
command acknowledge 2
command types 1
on-demand read 5
ping 6
set company meter number 9
set customer id 8
set encryption key 8
set latitude and longitude 4
set preferred buddy id 9
set static setup 3
set TCXO correction 3
set time 5
set voltage quality settings 4
settransmitter id 7
receiver miscellaneous 11
receiver operational mode 5
receiver polling 11
receiver requirements 1
diversity 1
operation modes 1
RF link requirements 1
sensitivity 1
regional network interface 3
register display board
description 1
relative time stamp 8
repeate level/status 3
requirements, on air time 3
RF link requirements 1
RF sequence number 2
RNI data security 7
RSS 134 2
S
safety 1
security
data 6
radio security 6
RNI data 7
TGB data 6
send data commands 16
sensitivity 1
serial number 3