User Manual

LEDs
The FlexNet EasyLink Reader incorporates LEDs to provide a visual indication of device
health. The lights can be solid, flashing, or blinking. Flash is a rapid on/off, like a heartbeat,
while Blink is a slower interval. LED indicators include:
Bluetooth (BT): Solid Blue to indicate a connection, Flashing Blue indicates traffic, and
Blinking Blue when waiting for a connection.
ERT Status: Flashes Red during initial boot, Blinks Green when operating.
ERT RX: Flashes Red when receiving messages.
ERT TX: Solid Red while transmitting to an ERT.
USB: Flashes Red to indicate any communication through the USB connection.
GPS: Blinks Green at a 1Hz rate, synchronized to the GPS time, indicating a GPS lock.
Currently the solution uses the GPS on the laptop/ToughPad.
FLX Status: Flashes Red during initial boot, Blinks Green when operating.
FLX RX: Flashes Red when receiving messages.
FLX TX: Solid Red while transmitting to a FlexNet SmartPoint module.
2 Setup the FlexNet EasyLink Reader | 10
DRAFT 8