User Manual

6. Once all fields are filled in click the Connect button. If you are returned to the login
screen the appropriate configuration files have downloaded and you may proceed with
normal login.
Bluetooth Pairing
If this is the first time you have used a ToughPad or a laptop with the FlexNet EasyLink
Reader you will need to establish the Bluetooth connections.
1. From the taskbar, click on the Bluetooth Devices icon and select Add a Device.
2. The FlexNet EasyLink Reader will appear in the list as RNBT-XXXX where XXXX is the
last four digits of the Bluetooth radio's MAC address. Select this device and click Next.
Note: The Bluetooth radio's MAC address is included on a label found on the outside of the
EasyLink transceiver.
3. Depending on your version of Windows, you may be asked to verify the code that
appears on the screen. If so, select Yes and then click Next.
4. Windows will install the appropriate driver. After the appropriate driver is installed,
the device appears as ready to use and can be detected by the FlexNet EasyLink
WorkBook Application.
2 Setup the FlexNet EasyLink Reader | 9
DRAFT 8