User's Manual

BA0031 User Manual (12.14.04) Page 8 12/14/2004
Device Mode – NBS (all models)
1. Set ‘BS ID’ and ‘BS Tx ID’. The device uses the ‘BS ID’ for identification when
sending or receiving messages in the backbone communication link. The range of
‘BS ID’ is 1 to 65,635. The device uses the ‘BS Tx ID’ when transmitting air
messages. The range of the ‘BS Tx ID’ is 1 to 16,777, 215.
2. Set the device IP parameters. Set ‘BS IP’ and ‘BS Port’ address. The ‘BS MAC
Address’ is configured in the factory.
3. Set the destination IP address. If necessary set a gateway address also.