Manualshelf

Installation Guide

ManualsBrandsSensus Metering Systems ManualsElectronicsNetwork Base Station For Metering System
78910111213141516
Sensus BA0031 Assembly & Installation Guide (12.14.04) Page 11 12/14/2004
Device Configuration
Device Mode Setting
1. Run the ‘Base II v1.10’ program.
2. Select the General configuration page
3. Set the PC COM port.
4. Set ‘Device Mode’ to ‘NTR’ or ‘Base Station’. In ‘Base Station’ mode set the
‘Debug Mode’ to ‘Disable’.