User's Manual

Sensus AR5000 User’s Guide 3-7
Search the Route
address to the end of the route. Or, you can use the search
function go to the last address. This function is available from
any point along the route.
To go to the last address on a route...
1 Open a route.
See
Start Collecting Data on page 2-2 for instructions on
opening a route.
2 Press the F3 key.
Search Route... MenuThe system displays the Search Route... menu.
3 Use the PgUp/PgDn key to select Go To End.
4 Press the ENTER key.
The system displays the last location on the route.
Note The first and last route address are
interchangeable, depending on how you have
the AR5000 configured. You can set the
system to traverse forward, starting at one end
of the route (ex.: address#1 through
address#10). Or, you can set the system to
traverse in reverse, starting at the opposite
end of the route (ex.:address#10 through
address#1). For more on this configuration
setting, see Alter Route Behaviors on
page 2-4.
Note F3 is the default key assignment for the Search
menu. Key assignments can be changed. For
more information, see About the Key
Controls/Functions.