User's Manual

Wired Units (Sensus, MultiRead Module (RadioRead Only), Neptune)

Sensus Encoder

1.) Gel cap the red wire from the encoder to the red wire on the

reading port (either port 1 or port 2 – if available).

2.) Gel cap the green wire from the encoder to the green wire on

the reading port.

3.) Gel cap the black wire from the encoder to the black wire on the

reading port.

MultiRead Module

1.) Gel cap encoders to the MultiRead Module per the instructions

sheet for the MultiRead Module (AMR-306).

2.) Once all encoders are connected to the MultiRead Module, gel

cap the red wire from the MultiRead Module to the red wire on

the reading port (either port 1 or port 2 – if available).

3.) Gel cap the green wire from the MultiRead Module to the green

wire on the reading port.

4.) Gel cap the black wire from the MultiRead Module to the black

wire on the reading port.

Neptune Encoder

1.) Gel cap the red wire from the Neptune encoder to the green

wire on the reading port (either port 1 or port 2 – if available).

2.) Gel cap the green wire from the Neptune encoder to the black

wire on the reading port.

3.) Gel cap the black wire from the Neptune encoder to the red wire

on the reading port.