User Manual

Overview of UniPro 1-1
UniPro/OMNI Communicator Model 100A WRMTM-40000
1 Overview of UniPro
The UniPro application programs, logs data from, and tests T
2
/C
2
/F
2
meters. Versions of the software have been
created for both a laptop PC and the Sensus AR5000 Handheld/AutoRead.
A separate hardware interface device (communicator 100A) allows the meter to be read, etc. using the laptop’s
USB port and the AR5000’s serial port.
Figure 1-1shows the basic screen for the UniPro software.
Figure 1-1: Screen Layout for UniPro
Command Bar: Contains the commands to open the various program elements.
Program Area: Displays the program elements.
Meter Status: Green indicates the meter is properly linked; red indicates the meter is not properly linked.
Progress Bar: When data is read from the meter, the progress bar indicates the progress of the transfer.
Exit Program Button: Select the Exit button to end the program.