User Manual

Setting Meter Defaults 4-6
UniPro/OMNI Communicator Model 100A WRMTM-40000
The Display Mode determines whether the display will show the Total or AMR output. The Total display will
always show the full eight digits of the reading. The AMR output will display the output of the AMR register,
selected in the Reading Digits screen.
13. From the drop-down list, select AMR or Total as the default Display Mode.
14. Click:
• Back to return to the Pulse Output screen.
• Cancel to stop programming and return to the Default Options screen.
• OK to display the Summary screen.
15. Click:
• Back to return to the Display Mode screen.
• Cancel to reject all defaults and return to the Default Options screen.
• OK to accept the data as shown and save the defaults.
If click OK in Step 14, the system displays the Defaults Finished screen.