User Manual

Programming an OMNI T2/C2/F2 Register 3-6
UniPro/OMNI Communicator Model 100A WRMTM-40000
The Display Mode screen determines whether the display will show the Total or AMR output. The Total display will
always show the full eight digits of the reading. The AMR output will display the output of the AMR register,
selected in the Reading Digits screen.
13. Select from three options:
• Click the Use Default button to select the Default Display Mode.
• Click the Use Current button to select the Current Display Mode.
• Use the drop-down list in the New field to select either the Total or AMR Display Mode.
14. Click:
• Back to return to the Pulse Output screen.
• Cancel to stop programming and return to the Program Wizard screen.
• OK to accept the Display Mode and display the Summary screen.