User Manual

Programming an OMNI T2/C2/F2 Register 3-5
UniPro/OMNI Communicator Model 100A WRMTM-40000
The Pulse Output determines the decimal place that a pulse represents in the pulse output. The screen displays
the Default and Current settings with the Units of Measure and Resolution for each.
11. Select from three options:
• Click the Use Default button to select the Default Pulse Output.
• Click the Use Current button to select the Current Pulse Output.
• Select a New Pulse Output by clicking on the decimal place that you want a pulse to
represent.
12. Click:
• Back to return to the Reading Mode screen.
• Cancel to stop programming and return to the Program Wizard screen.
• OK to accept the Pulse Output and display the Display Mode screen.