User Manual

Programming an OMNI T2/C2/F2 Register 3-3
UniPro/OMNI Communicator Model 100A WRMTM-40000
The Reading Digits screen allows you to set the number of digits that are displayed on the register and the units of
measure for the reading.
The window lists the Default settings and the Current settings; the Resolution sections automatically calculate the
resulting AMR and Total display resolutions for the settings.
6. Select from three options:
• Click the Use Default button to select the Default Reading Digits.
• Click the Use Current button to select the Current Reading Digits.
• Select a New set of reading digits by clicking the first and last digits of the range you
wish to display. For example to display the least significant four digits click the 4 box,
then the 2 box. The selected digits will display a white background and the unselected
digits will display a gray background.
7. Select a Units of Measure from the drop-down list.
8. Click:
• Back to return to the Programmable Text screen.
• Cancel to stop programming and return to the Program Wizard screen.
• OK to accept the Reading Digits and display the Reading Mode screen.
If you do not make one of the above selections, the system will automatically use the
Default settings.