User manual

Sensorsoft Alert User Manual

Appendix D - Modem DIP Switch Settings

Modem DIP switch settings required for use with Sensorsoft Alert Paging

If you have a 3Com or U.S. Robotics modem with DIP switches, please make sure they reflect the required

settings shown below. If you have another brand of modem that has DIP switches, please make sure they

reflect the settings shown in the Function column:

DIP Switches (External Modems with DIP Switches Only)

Switch Position Function

1 OFF - UP Normal DTR operations

2 OFF - UP Result codes are words

3 ON - DOWN Enable result codes

4 ON - DOWN Echo disabled

5 ON - DOWN Auto Answer disabled

6 OFF - UP CD reflects state of carrier

7 OFF - UP On power-up load user definition

8 ON - DOWN Modem operates in smart mode