User manual

Sensorsoft Alert User Manual
ssCommandOnScalarCriticalHigh
DESCRIPTION
: This is the command-line string that will be executed by the shell when the
currently indexed variable on the currently indexed device enters Breach of Critical High Limit
status.
TYPE
: String
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.58.0
Non-volatile
ssCommandOnScalarCriticalHighEnable
DESCRIPTION
: A zero value disables this command line alert. A value of one enables this
command line alert. When enabled, this command line is executed when the currently indexed
variable on the currently indexed device enters Breach of Critical High Limit status. It will be sent
periodically using the time interval in minutes specified by
ssCommandOnScalarCriticalHighInterval.
TYPE
: Integer
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.59.0
Non-volatile
ssCommandOnScalarCriticalHighInterval
DESCRIPTION
: The time interval in minutes between command line execution when the
currently indexed variable on the currently indexed device enters Breach of Critical High Limit
status.
TYPE
: Integer
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.60.0
Non-volatile
ssCommandOnScalarWarningHigh
DESCRIPTION
: This is the command-line string that will be executed by the shell when the
currently indexed variable on the currently indexed device enters Breach of Warning High Limit
status.
TYPE
: String
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.61.0
Non-volatile
ssCommandOnScalarWarningHighEnable
DESCRIPTION
: This is the command-line string that will be executed by the shell when the
currently indexed variable on the currently device enters Breach of Warning High Limit status.
69