User manual

Sensorsoft Alert User Manual
TYPE: String
ACCESS
: Read only
OID
.1.3.6.1.4.1.15848.1.30.0
ssBooleanCriticalState
DESCRIPTION
: The user-definable state string, if the currently indexed variable is of the Boolean
class. (This string must be the value of either ssBooleanOneStateString or
ssBooleanZeroStateString, depending on which state you would like to be alerted on).
TYPE
: String
ACCESS
: Read only
OID
.1.3.6.1.4.1.15848.1.31.0
ssTrapOnScalarCriticalEnable
DESCRIPTION
: A zero value disables this trap. A value of one enables this trap. When enabled,
this trap is sent when the agent detects that the currently indexed variable on the currently indexed
device enters a Breach of Critical High Limit status or Breach of Critical Low Limit status. It will
be sent periodically using the time interval in minutes specified by ssTrapOnScalarCriticalInterval.
TYPE
: Integer
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.32.0
Non-volatile
ssTrapOnScalarCriticalInterval
DESCRIPTION
: The time interval in minutes between traps when the agent detects that the
currently indexed variable on the currently indexed device enters a Breach of Critical High Limit
status or Breach of Critical Low Limit status.
TYPE
: Integer
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.33.0
Non-volatile
ssTrapOnScalarWarningEnable
DESCRIPTION
: A zero value disables this trap. A value of one enables this trap. When enabled,
this trap is sent when the agent detects that the currently indexed variable on the currently indexed
device enters a Breach of Warning High Limit status or Breach of Warning Low Limit status. It
will be sent periodically using the time interval in minutes specified by
ssTrapOnScalarWarningInterval.
TYPE
: Integer
ACCESS
: Read/Write
OID
.1.3.6.1.4.1.15848.1.34.0
Non-volatile
62