User manual

Sensorsoft Alert User Manual
6. After your Alert appliance has rebooted, you will be able to login to its web interface with username:
admin and password: begin. Please note that the read-only user (ruser) account password has also
been reset to begin.
Setting date and time
1. Login to the Alert appliance’s web interface as admin.
2. Click on the Set Date/Time hyperlink located on the left side of the View Monitor List page.
3. This will bring up the Date and Time Settings page.
Figure 3: Setting date and time
4. You have two options for time keeping:
a. Using an NTP Server is the recommended option. After selecting this option, you must specify an
NTP server and your time zone.
b. Manually setting the date and time is not recommended for the SSA7001 appliance, because it has
no internal clock battery to keep the date and time up to date during power disconnection. The
SSA7004 and SSA7008 appliances have clock batteries that will update the time during power
disconnection.
5. Depending on which method you would like to use, select the appropriate radio button. If using NTP,
you need to enter the NTP server host/IP in the text field provided, as well as select the time zone from
the drop down box. If you would like to set the time manually, you need to set the month, day, year,
hour, minute, and second from each of the drop down boxes, as well select the time zone from the drop
down box. Finally, click on the Submit button to save your changes.
22