User manual

Sensorsoft Alert User Manual

Safety Instructions

Read the following safety guideline to protect yourself and your Sensorsoft Alert Appliance.

 DANGER! - Do not operate your Sensorsoft Alert appliance with the cover removed.

 DANGER! - In order to avoid shorting out your Sensorsoft Alert appliance when disconnecting the

network cable, first unplug the cable from the equipment and then from the network jack. When

reconnecting a network cable to the equipment, first plug the cable into the network jack, and then into

the equipment.

 DANGER! – Do not push any objects through the openings of the Sensorsoft Alert appliance. Doing

so can cause fire or electric shock by shorting out interior components.

 Important! – To help protect the Sensorsoft Alert appliance from electrical power fluctuations, use a

surge suppressor, line conditioner, or uninterruptible power supply.

 Important! – Be sure that nothing rests on the cables of the Sensorsoft Alert appliance and that they

are not located where they can be stepped on or tripped over.

 Important! – Do not spill food or liquids on the Sensorsoft Alert appliance. If it gets wet, contact

Sensorsoft.

 Important! – Keep your Sensorsoft Alert appliance away from heat sources and do not block cooling

vents.

Working inside the Sensorsoft Alert

Appliance

Do not attempt to service the Sensorsoft Alert appliance yourself, except when following instructions from

Sensorsoft Technical Support personnel. In the latter case, first take the following precautions:

 Turn the Sensorsoft Alert appliance off.

 Ground yourself by touching an unpainted metal surface on the back of the equipment before touching

anything inside it.

Replacing the Battery

A coin-cell battery maintains date and time information in SSA7004 and SSA7008. The SSA7001 does not

have this battery, so it must use NTP to keep the date and time up-to-date.

WARNING: There is the danger of explosion if the battery is replaced incorrectly. Replace the battery

only with the same or equivalent type (3V Lithium CR2032). Dispose of used batteries according to the

manufacturer's instructions.