User's Manual

pulseEKKO PRO 10-Helpful Hints
117
10 Helpful Hints
10.1 Batteries
Replace batteries before they go dead. Nothing is more annoying than losing data in the middle of a
traverse. Carry plenty of spares.
10.2 Measuring Position
When performing a profile where the accuracy need only be accurate to the nearest metre, set the step
size equal to some fraction of your antenna spacing. On the rope used to hold the antennas at a fixed
spacing, mark the step size. Each time the antennas are moved mark the ground (take note of a mark or
feature) where the next antenna placement will be based on the mark on the string. For accurate
positioning a tape measure laid out on the survey line is most effective.
If a tape measure is being used make sure it is NOT metal or does NOT have a metal center. Some cloth
tape measures do have metal centers. Odd effects can appear in data when such measuring tapes are
used.
10.3 Data Files
Backup data often or at least at the end of each survey day.
10.4 Spares
When going out on a trip, make sure you have plenty of spares. It is much easier to carry a spare fibre
optic cable than try and repair one in the field. Remember fuses and a Philips screw driver. A volt/ohm
meter is also useful.