Users Manual
Table Of Contents
PDP User's Guide Troubleshooting & Product Care
64
1) The cable connectors need to stay clean and free of dust and moisture.
Use a brush or air spray to clean dust, lint and other foreign particles from
these connectors.
2) After working in rainy conditions, disconnect the cables and check for
water in the receptacles. Remove the water or allow to air dry, if
necessary. Never allow the system to sit in rainy conditions for long
periods of time.
Cables are not covered by the warranty. Improper use and/or neglect will result in
downtime until they are repaired or replaced.
7.3 Connectivity Issues
The tablet is configured to wirelessly connect to the PDP sensor at the factory.
Occasionally, it is possible that it might lose this connection. If it fails to connect,
see Section 3.1 for re-establishing Wi-Fi connectivity.
You can also press the refresh button located in the top left of the window, as
shown in Figure 7-2.
Figure 7-2: Refresh button shown