Users Manual

PDP User's Guide PDP Collection Software
38
Figure 4-19: Inserting a flag
4.2.2 Stationary Mode
Stationary mode is used to collect data over a single area without moving the PDP
(Figure 4-20). Under Plot options (Section 4.1.3), the user can specify the duration
of the data collection. Data collection will be stopped after the specified time has
passed, and the file written. A progress bar displays the time completed as a
percentage of the total time selected. Pressing Stop before the time has passed
will stop collection and write the file.
If the user selects Continuous data collection, it will keep collecting data until the
user presses Stop. No progress bar is displayed.
A common use of this mode is to determine density more precisely at a specific
area to correlate with coring.