Users Manual

PDP User's Guide Getting Started
8
Screw the Topcon GPS receiver onto the threaded GPS mount (Figure 2-10).
Figure 2-10: Screw the Topcon GPS receiver onto the GPS mount
2.3 Charging the Battery
Plug the battery charger into port #4 in Figure 2-11. Before using the PDP system
for the first time, the battery should be charged for at least 4 hours, so it is fully
charged. The charge indicator (#5 in Figure 2-11) will light up when charging and
turn off when it’s done.
2.4 Connections and Cable Management
There are a few connections that need to be made.
Figure 2-11: Labelled items on the PDP sensor. 1) GPS port 2) Odometer port
3) Power button 4) Battery charger port 5) Battery charge indicator
1. Connect the serial port end of the GPS cable into port #1 in Figure 2-11
2. Connect the odometer cable into port #2 in Figure 2-11
1
2
3
4
5