User's Manual

Noggin 5-SmartTow Assembly
19
Assemble the Noggin 100 electronics and antennas as shown in Section 3 .
The parts for the Noggin 100 SmartTow frame are shown in .
Figure: 5-3 The Noggin 100 SmartTow frame parts (left) and assembled (right). Ensure the antenna post blocks face
outward before assembling. The pieces are connected using the 4 thumb screws as shown in the figure below. The
Handle and Big Wheel odometer are not connected to the frame with thumb screws but held in place once the anten-
nas are attached.
Figure: 5-4 Close-up of thumbscrews used to assemble the Noggin 100 SmartTow frame. Be careful not to strip the
threads!