User's Manual

ManualsBrandsSensors & Software ManualsElectronicsGround Penetrating Radar System

Table Of Contents

1 General Overview
2 Noggin Components
3 Noggin 100 Assembly
4 SmartCart Assembly
- 4.1 Unfold the Handle
- 4.2 Attach Wheels
- 4.3 Attaching Separation Bars to the SmartCart
  - 4.3.1 Separation Bar Assembly
- 4.4 Attaching the Swivel Adapters (Noggin 250, 500 & 1000)
- 4.5 Attaching the Noggin to the SmartCart
- 4.6 Attach the Digital Video Logger (DVL)
- 4.7 Attach the Battery Unit
- 4.8 Adding GPS Mount to the SmartCart
5 SmartTow Assembly
- 5.1 Noggin 100
- 5.2 Noggin 250
- 5.3 Noggin 500 and 1000
6 SmartHandle Assembly (Noggin 500 & 1000 only)
- 6.1 SmartHandle “Pull” Configuration
- 6.2 Cable Connections
7 Rock Noggin Assembly (Noggin 500 & 1000 only)
8 Connecting GPS
9 Digital Video Logger (DVL)
- 9.1 Compact Flash Drive
- 9.2 DVL Temperatures
- 9.3 Running a DVL Detached from a Smart System
- 9.4 DVL Carrier
- 9.5 Connecting the DVL to the Smart System
10 Powering Up the System
11 Locate & Mark Mode
- 11.1 System Settings Screen
- 11.2 Scanning Screen
- 11.3 Locating Screen
- 11.4 Image Settings Screen
- 11.5 Changing the Date and Time
- 11.6 English and Equivalent Icons
12 Survey & Map Mode
- 12.1 Survey & Map Menu
- 12.2 Data Acquisition
- 12.3 Noggin Setup
- 12.4 Noggin File Management
- 12.5 Noggin Utilities
13 Troubleshooting
- 13.1 Power Supply
- 13.2 System Communications
- 13.3 System Overheating
- 13.4 DVL Problem
- 13.5 Noggin Problem
- 13.6 Creating a Test Line for Data Quality
- 13.7 Contacting Sensors & Software Inc.
14 Care and Maintenance
- 14.1 Battery Care
- 14.2 DVL Internal Battery
- 14.3 Cable Care
- 14.4 Skid Pads
- 14.5 Storage Cases
- 14.6 Spare Parts
Appendix A Noggin Data file Format
Appendix B Health & Safety Certification
Appendix C GPR Emissions, Interference and Regulations
- C-1 FCC Regulations (USA)
- C-2 ETSI Regulations for the EC (European Community)
- C-3 Industry Canada Regulations
Appendix D Instrument Interference
Appendix E Safety Around Explosive Devices
Appendix F Using the PXFER Cable and WinPXFER Software
- F1 Transferring Data to a PC using the PXFER Cable
- F1.1 Connecting the Digital Video Logger to a PC
- F1.2 PXFER Cable Types
- F1.3 Installing and Running the WinPXFER Program
- F1.4 Setting the DVL to the PXFER Cable Type
- F1.5 Transferring Noggin Data Buffer Files
- F1.6 Exporting Nogginplus Data
- F2 Transferring One or More Noggin PCX Files to an External PC using WinPXFER
Appendix G GPR Glossaries
- G-1 Basic GPR Terms
- G-2 Common GPR Terms
- G-3 Advanced GPR Terms

Noggin 5-SmartTow Assembly

Attach the handle to the front of the SmartTow Brackets with the U-brackets and log metal pins.

The handle should be attached on the end of the Noggin away from the 37 socket cable

connection.

Connect the large black Noggin-to-DVL cable to the 37-socket connector on the Noggin and latch

into place, ensuring the cable is looped to provide some slack and it is routed along the top of the

SmartTow bracket. Secure the cable to the bracket and along the side of the handle using 2 or 3

Velcro straps.