User's Manual

11-Powering Up the System Noggin

Once the Digital Video Logger powers up, the Main Menu is displayed with 4 choices:

• Pressing the A button enters Locate & Mark mode (12: p.51).

• Pressing the B button enters Survey & Map mode (13: p.74).

• Pressing the 1 button displays contact information for Sensors & Software Inc.

• Pressing the 3 button switches the menu for use with older Noggin and Noggin

plus

sys-

tems (these are systems with a Yellow or Silver Noggin sticker on top of the electronics

housing). For details on using this menu system, see the Smart Systems manual.

• Pressing the 5 button will turn the DVL off.

This screen also displays the following information:

• Battery Voltage: The system will shut down when the battery voltage reaches about

10.2 Volts (see 15.1: p.126 for more details on the battery).

• Temperature: The internal temperature of the DVL is displayed on this screen in Cel-

sius and Fahrenheit.

• Software Version: The version of the software loaded on the DVL.

When the Noggin Smart System is not being used, do not leave the battery plugged in.

The system draws about 0.1 amps even when it is powered off and this will gradually drain

the battery.

Menu for

Noggins with a

Gold sticker

Noggins with

Yellow or

Silver stickers