User's Manual

Noggin 5-SmartCart Configuration Assembly
15
5.5.2 Noggin 500 & Noggin 1000
Remove the Clevis pins from the swivel adapters. Now, on the bottom of the cart, locate the two,
flat, moveable crossbars suspended from the separation bars.
Notice that each crossbar has 2 holes, one on each side. To attach the Noggin 500 to the cart,
place the crossbars into the slots on the top of the swivel adapters, line up the holes and insert
the Clevis pins (Figure 5-10).
Figure: 5-10 Attaching the Noggin 500 and Noggin 1000 to the cart.
Crossbar (with hole)
Clevis Pin
Swivel Adapter