User's Manual

Noggin 4-Base Configuration Assembly
7
The DVL-to-Noggin cable is a Y-shaped cable with 3 connections; one to the Noggin sensor, one
to the DVL and one to the battery or the AC power supply.
Noggin Connection: Connect the 37-pin D-connector on the black cable to the 37-socket D-
connector on the Noggin. Use the latch to secure this connection.
DVL Connection: Attach the end of the DVL-to-Noggin cable with the 37-socket D-connector to
the 37-pin receptacle on the back of the DVL. This attachment can be secured by tightening the
latch underneath.