Specifications

16 INSTALLATION AND SERVICE GUIDE
SpeedDome Ultra III and IV Camera Dome
s
8000-2573-18, REV.
D
7. Connect housing and eyeball assembly to base
(Figure 14).
a. Align dimple on cap of dome with rib on
mounting base.
b. Mate housing and eyeball assembly to base
and turn it clockwise until you hear a click.
Figure 14. Connecting housing and eyeball
assembly to base (cables and lanyard not
shown)
L
A
T
C
H
8. Wait a few seconds for dome to begin its
homing routine. Homing routine indicates that
address was placed into dome memory and
that dome is ready for programming.