Specifications

12 INSTALLATION AND SERVICE GUIDE
SpeedDome Ultra III and IV Camera Dome
s
8000-2573-18, REV.
D
Indoor Installation
This section explains how to connect the housing
and eyeball assembly to a:
· RUPTB mounting base
· RUIOB mounting base.
Items You Will Need
You should have on hand the following
tools and parts:
 Install/Removal tool to attach and detach
domes and bubbles without a ladder from
RUIOB mounting bases.
 Base kit:
- RUIOB (base with I/O board), or
- RUPTB (standard base).
 Housing and eyeball assembly, 0100-2283-XX.
The -XX determines the type of camera used.
For Ultra III:
-01 = Color NTSC
-02 = Color PAL
-03 = Black and White EIA
-04 = Black and White CCIR
For Ultra IV:
-11 = Color NTSC
-12 = Color PAL
-13 = Black and White EIA
-14 = Black and White CCIR
Other Preparations
To ensure a smooth and successful
installation, you must:
 Have electrical work comply with latest national
electrical code, national fire code, and all
applicable local codes and ordinances.
 Coordinate work with other trades to avoid
interference.
 Verify existing site conditions and coordinate
with the owner’s representative and appropriate
utilities as required.
 Obtain copies of all related plans, specifi-
cations, shop drawings and addenda to
schedule and coordinate related work.
 Thoroughly review the project to ensure that all
work meets or exceeds the above require-
ments. Bring alleged discrepancies to the
attention of the CCTV Project Coordinator.