Specifications

Chapter 6  Alarms 37
Motion Alarm Status Table
The MOTION ALARM STATUS TABLE displays the current day and
night motion alarm option settings for each camera. In the example
below, camera 5 is set for motion alarms between 8 AM and 5 PM
for objects at least 2 targets wide by 3 targets high. Motion alarms
will not be generated for camera 5 between 5 PM and 8 AM.
The table allows you to quickly review the motion alarm settings
for the multiplexer. To view the table during normal operation
(outside the menu system), press Function+down arrow. The
table appears (over the color bars) as shown below.
The MOTION ALARM STATUS TABLE has two pages. Each page
displays the Day and Night option settings of eight cameras (01
through 08 or 09 through 16). Press Call to toggle between the
pages.
The MOTION ALARM STATUS TABLE is for display only. You
cannot change multiplexer motion option settings using this screen.
To make changes, press Live to exit the table and get into the
setup menu system to change settings.
Figure 8  Motion Alarm Status Table