Specifications

32 Video Multiplexer with Video Motion Detection
2x2 Format The 2x2 format is the familiar quad display. It displays four pictures
at one time. Any camera can be selected for display in any window.
Cameras not already displayed can be sequenced in the lower right
window.
Press and hold the 2x2 button. The multiplexer displays the 2x2
format with the cameras last selected for 2x2 display.
While holding the 2x2 button, press the Camera (116) button
for the upper left window on the monitor (window #1). Continue
pressing Camera buttons until each window contains the desired
camera. Release the 2x2 button when you have finished selecting
cameras.
The multiplexer remembers the 2x2 camera selection and will recall
it the next time the 2x2 format is displayed.
3x3 Format
(9 and 16-camera models only)
The 3x3 format displays nine pictures at one time. Any camera
can be selected for display in any window. Cameras not already
displayed can be sequenced in the lower right window.
Press and hold the 3x3 button. The multiplexer displays the 3x3
format with the cameras last selected for 3x3 display.
While holding the 3x3 button, press the Camera button you want
displayed in the upper left (window #1). Continue pressing
Camera buttons until each window contains the desired camera.
Release the 3x3 button when you have finished selecting cameras.
The multiplexer remembers the 3x3 camera selection and will recall
it the next time the 3x3 format is displayed.
4x4 Format
(16-camera models only)
The 4x4 format displays 16 pictures at one time. Any camera can
be selected for display in any of the 16 windows.
Press the 4x4 button. The multiplexer displays the 4x4 format
showing all the cameras in the previously selected order.
While holding the 4x4 button, press the Camera button for the
camera desired in window #1. Continue pressing Camera buttons
until each window contains the desired camera. Release the 4x4
button when you have finished selecting cameras.
The multiplexer remembers the 4x4 camera selection and will recall
it the next time the 4x4 format is displayed.