Specifications
Chapter 5 Operation 31
Call Monitor The call monitor can display any live camera in the full screen
format. To select a camera for display on the call monitor:
1. Press the Call button. The Call light comes on, indicating
the multiplexer is in the call select mode. If the light does not
come on, the multiplexer is in the main select mode. Press
Call again to start over.
2. Press any Camera button. The call monitor displays the
selected camera.
To exit the call select mode, press the Call button. The multiplexer
resumes normal operation.
Viewing Multiple Cameras
The main monitor can display multiple cameras in any available
format: Picture-In-Picture (PIP), 2x2, 3x3 (9-camera and 16-
camera models only) and 4x4 (16-camera models only). Each
format can be composed by selecting the cameras and their location
on screen.
Cameras not already displayed can be sequenced in the lower right
window of any multiple camera format. See Sequencing Cameras
for details.
Picture in Picture (PIP) The Picture-In-Picture format displays a full screen background
picture with a 1/16 size picture insert. A camera can be selected
for display and can be swapped instantly between the background
and the insert. The insert can also be sequenced.
1. Press the PIP button. The multiplexer displays the current
camera and the last selected PIP insert camera.
2. Press the Camera (116) button for the desired PIP insert
camera. The selected camera appears full screen.
3. Press the PIP button again. The multiplexer swaps the two
cameras and puts the selected camera in the PIP insert.
4. Press the Camera (116) button to view full screen.
You can swap the background and insert cameras at any time by
pressing the PIP button.
The multiplexer remembers the PIP camera selection and will recall
it the next time the PIP format is displayed.