Specifications
Chapter 4 Setup 25
SENSE (Sensitivity) The SENSE option is based on the degree of contrast between the
moving object and background for the current camera. The motion
test can help you pick the most effective SENSE setting. It toggles
as follows:
XLO Extra low sensitivity.
LO Low sensitivity.
MED Medium sensitivity.
HI High sensitivity.
XHI Extra high sensitivity.
The default sensitivity setting is MED.
SIZE The SIZE option determines the minimum object size detected at
the current camera. You set the object size by selecting its height
and width in targets. For example, a 2Wx4H setting is an object
two targets wide and four targets high. A 1Wx1H object is a single
target. The largest possible object setting is 9Wx9H. A smaller
object size makes motion detection more likely, and a larger size
means fewer objects will be large enough to trigger a motion alarm.
To set the object size, use the arrow buttons to move the flashing
highlight to W (width) or H (height). Use the up and down arrow
buttons to set the value (19).
NOTE: To be detected, an object must trigger at least one
row and one column of targets covered by the SIZE
setting. For example, a 2Wx5H setting requires an
object to trigger at least 2 targets horizontally and 5
targets vertically within a 2Wx5H active target area.
The object may trigger additional targets.
The default SIZE setting is 1Wx1H.