Specifications

24 Video Multiplexer with Video Motion Detection
Motion Options The Day and Night Motion Setup screens display a status line
containing the four multiplexer motion detection options. Use
the arrow buttons to position the flashing highlight on each option
and choose the value that best suits your needs. If the highlight is
not visible, press Zoom to activate it. Option setting applies only
to the time period covered by the screen (determined by the current
DAY START TIME and NIGHT START TIME settings).
ALRM (Alarm) The alarm option selects the motion alarm operating mode for the
current camera.
NOTE: Cameras with ALRM set to OFF still function as activity
detectors. Active cameras are given recording priority,
but motion alarms are NOT triggered.
OFF  The multiplexer does not initiate a motion alarm when
it detects activity at this camera.
TST  Select this setting to test the current motion setup.
When it detects motion, the multiplexer freezes the scene and
marks all triggered targets with an X. This helps you see the
effects of changing which targets are on, and which are off,
and the effects of different SENSE, SIZE or DELAY settings.
To repeat the test, press right arrow. To cancel the test, press
left arrow.
NOTE: After cancelling the test, the ALRM setting returns to
OFF (the default). Make sure you change the setting
to ON or AND if you want either type of alarm.
AND  The multiplexer initiates a motion alarm only when
it detects both activity and a contact alarm at this camera.
ON  The multiplexer initiates a motion alarm when it detects
activity at this camera.
The default alarm option setting is OFF.