Specifications

Chapter 4  Setup 17
SETUP MENUS
There are eight menus in the setup menu system. The following
paragraphs take you through the menu system step-by-step, de-
scribing each menus purpose and options.
Menu 1  System Time/Date
Menu 1 displays the system time and date (maintained by the
multiplexer internal clock/calendar), the product firmware revi-
sion number and revision date. By default, the multiplexer dis-
plays the time and date at the top of the main monitor. In live
mode, it displays the system (current) time and date. In tape mode,
it displays the time and date of the recording (encoded on the
tape).
You can turn the time/date display off or on at any time by press-
ing Function+right arrow.
To set the time and date, use the arrow buttons to position the
flashing highlight over each character and set it. Enter the time in
HH:MM:SS 24-hour format. Enter the date in MM/DD/YY format
(DD.MM.YY format in the PAL version). The clock starts run-
ning when you move the highlight into the date field.
NOTE: Be sure to turn off the VCRs time/date display feature.
If it is turned on, it may interfere with tape playback.
Multicamera display during playback will have time
and date over each image and at the top of the screen.
If the time/date is too high on the screen, it overlaps
the vertical interval.
When finished, press the Zoom button to go to menu 2 or
Function+Zoom to save all changes and leave the setup system.