Specifications
16 Video Multiplexer with Video Motion Detection
Chapter 4 î‚— Setup
SETUP MENU SYSTEM
The on-screen menus allow you to set up key features such as
system time and date, day and night start times for motion detec-
tion, alarm message display, alarm message latch, video loss alarm,
audible alarm, alarm input polarity, alarm output polarity, VCR
record time, VCR alarm record time, alarm duration, global dwell
time, camera titles, motion detection, and system security. All
setup data is stored in nonvolatile memory where it is protected
against loss due to power failure.
NOTE: To perform multiplexer setup, you must first gain ac-
cess to the on-screen menu system. Refer to Security
Measures in the front of this manual.
Once inside the menu system, multiplexer setup involves three
basic operations:
1. Selecting the menu.
2. Positioning the flashing highlight.
3. Setting the option.
Selecting a Menu
Press the Zoom button to go to the next setup menu. The next
menu appears with the flashing highlight at the first option. If
you press the Zoom at the last menu (SECURITY LOCK), the unit
exits the setup mode and returns to normal operation.
Positioning the Highlight
Use the left and right arrow buttons to position the menu high-
light. Press the right arrow to move the highlight to the next
character or option. Press the left arrow to move the highlight to
the previous character or option. When you reach one end of the
menu, the highlight appears at the other.
Setting an Option
Press the up arrow or down arrow to scroll through the available
settings or characters:
0î‚–9 Aî‚–Z _(represents a space) / : = - + .(period)
When you reach the first or last setting or character, the sequence
begins again.