Specifications

Chapter 2  Front & Rear Panels 9
8. vcr in  This BNC connector accepts the composite video
playback signal from a VCR.
9. vcr out  This BNC connector provides a composite video
signal to the record input of a VCR.
10. call mon  This BNC connector provides a composite video
signal to the call monitor for the display of any alarm cameras
(one at a time) or one live camera in the full screen format.
11. main mon  This BNC connector provides a composite
video signal to the main monitor to display cameras in
currently selected format.
12. cam in  These BNC connectors accept the composite video
output of color or B&W cameras. Camera input impedance
termination is selectable for each camera, using the small
switch on the back panel. Use 75 Ω for termination, or use
∞∞
∞∞
∞ if looping to other equipment.
13. cam out  These BNC connectors provide looping camera
video from the corresponding camera input.
14.
∞∞
∞∞
∞ or 75 Ω switch  These switches allow you to set
impedance for each camera input. Set the switch to 75 Ω to
terminate it, or set it to
∞∞
∞∞
∞ if looping to other equipment.