Specifications
6 Video Multiplexer with Video Motion Detection
Chapter 2 Front & Rear Panels
The following is a brief overview of the multiplexer front and rear
panels. Refer to Chapter 4 Setup and Chapter 5 Operation
for a detailed discussion of multiplexer features and panel
functions. Panel controls are illustrated below and each button is
described by name and function.
THE FRONT PANEL
Some front panel buttons have dual functions. The primary
function is listed first, followed by the secondary function (shown
in parentheses). Indicator lights (LEDs) are above each button.
1. Function (1 Cam) Used in combination with other
buttons, it allows access to the system setup menus and other
special functions described below.
To: Press:
Display ALARM COUNTER Function+left arrow
Toggle time/date display Function+right arrow
Display MOTION ALARM
STATUS TABLE Function+down arrow
Start 1 camera recording Function (1 Cam)+
a Camera button
2. Zoom (full screen) Press this button to view a 2xzoom of
the selected camera. Press Zoom again to go back to full screen
view.
3. up arrow (PIPPicture-In-Picture) Displays the currently
selected camera in the full screen format, inset with a 1/16
size picture of one other camera. The inset picture can be
changed to a different camera or used for sequencing cameras.
This button functions as an up control in the zoom and
setup modes.
Figure 5 Front Panel Controls and Indicators